
Turn a Raspberry Pi into a Reliable Network-Wide DNS Filter
A Raspberry Pi running Pi-hole can block many ad, tracking, and known malicious domains for devices across your home network. Instead of installing an extension on every browser, you configure your router or individual devices to send DNS lookups to the Pi. Pi-hole checks those requests against your blocklists and forwards allowed lookups to an upstream DNS resolver.
This guide covers a practical Raspberry Pi Pi-hole setup, how to connect your network, and how to maintain it without turning a small DNS service into a fragile single point of failure. The key steps are simple: give the Pi a stable local IP address, install Pi-hole from its official installer, point clients to it, then test and maintain the setup.
What Pi-hole Does—and What It Does Not
DNS translates names such as example.com into IP addresses. Pi-hole acts as a DNS server for your local network: it compares requested domains with configured blocklists, blocks matching requests, and forwards other requests to an upstream resolver such as your router, Cloudflare, or Quad9.
Because it filters at the DNS level, Pi-hole can cover phones, smart TVs, and other devices that do not support browser extensions. However, DNS filtering is not a full firewall or antivirus. It cannot reliably remove ads served from the same domain as a video or page, and it does not inspect encrypted web traffic. Some apps may also use hard-coded DNS or encrypted DNS features that bypass your network’s Pi-hole.
Choose Hardware and Prepare the Network
A Pi-hole installation does not need a powerful Raspberry Pi. A supported Raspberry Pi with a stable power supply, a microSD card or other reliable storage, and a network connection is generally enough. Ethernet is preferable for a home DNS service because it avoids Wi-Fi dropouts, though Wi-Fi can work for a small setup.
Reserve a stable IP address
Clients need to know where to find Pi-hole. Reserve a static DHCP lease in your router’s admin interface, using the Pi’s network interface and MAC address. This is often safer than setting an address manually on the Pi because the router avoids assigning that address to another device.
For example, if your home network uses 192.168.1.0/24, you might reserve 192.168.1.10 for the Pi. Your addresses will differ; check your router’s LAN settings rather than copying this value. Record the Pi’s IP address and gateway before proceeding.
Install Raspberry Pi OS
- Use Raspberry Pi Imager to write a supported Raspberry Pi OS release to your storage device.
- Configure a hostname, user, and network access in Imager if you plan to administer the Pi headlessly.
- Boot the Pi and update the operating system:
sudo apt update
sudo apt full-upgrade
Reboot if prompted. For help choosing a display and peripherals, see How to Connect Raspberry Pi to Monitor in 2025 – Complete Display Setup Guide or How To Connect Raspberry Pi to a Projector. If the Pi will run continuously, good airflow and a suitable enclosure help; see How To Cool Down Raspberry PI.
Install Pi-hole on the Raspberry Pi
Follow Pi-hole’s official installation instructions and use its official installer. The installer configures the DNS service and web interface and prompts you to choose a network interface, upstream DNS provider, and blocklists. Review the prompts carefully; defaults are suitable for many home networks, but the correct interface and IP address depend on your setup.
On a headless Pi, connect over SSH, then run the command currently provided by the official Pi-hole documentation. Avoid copying installer commands from untrusted websites, and do not run an unfamiliar script with administrator privileges without checking its source.
During setup:
- Select the wired or wireless interface that clients will reach.
- Confirm the Pi’s reserved address and gateway.
- Choose an upstream resolver. Consider its privacy policy, logging practices, and availability.
- Keep the web interface enabled if you want a convenient dashboard, and save the generated admin password securely.
After installation, open http://<pi-ip-address>/admin from a device on your LAN. For example, if the Pi is at 192.168.1.10, visit http://192.168.1.10/admin. The exact interface and available options can vary by Pi-hole release.
Point Your Home Network to Pi-hole
Installing Pi-hole alone does not make it the DNS server for every device. The most convenient approach is to configure your router’s DHCP settings to advertise the Pi-hole address as the DNS server. New and renewed DHCP leases will then direct clients to Pi-hole.
Router interfaces differ. Look for LAN, DHCP, or DNS settings, and enter the Pi’s reserved IP address as the DNS server. Do not enter a public resolver as a second DNS server if your goal is consistent filtering: many clients may use either advertised server, which can let requests bypass Pi-hole. Some routers do not allow a custom DNS server or continue advertising themselves as DNS. In that case, consult the router documentation, or configure DNS on selected devices instead.
After changing DHCP settings, reconnect a test device to the network or renew its lease. Check that the device is using the Pi-hole address. On Linux, you can inspect resolver settings with:
resolvectl status
Then test a lookup by querying Pi-hole directly:
nslookup example.com 192.168.1.10
Replace the sample IP with your Pi-hole address. A successful response confirms that the DNS server answers the query; the Pi-hole dashboard’s query log can confirm whether requests are reaching it. Test a few everyday sites and apps, not just a known advertising domain. Blocklists change, and a blocked test domain is not a universal measure of whether your setup is working.
Manage Blocklists Without Breaking Services
Pi-hole’s blocklists are domain lists, not filters for complete web pages. Start with the default or a modest, reputable list selection. Adding many overlapping lists can increase false positives and make troubleshooting harder without producing a proportional improvement.
If an app or website stops working, check the query log to identify blocked domains. Add a domain to the allowlist only when you understand why the service needs it. Prefer a narrow, specific exception over allowing a broad parent domain, which may also permit unrelated trackers or content.
For a household with different needs, Pi-hole supports client groups in current releases. You can apply different policies to groups—for example, a more restrictive profile for selected devices—rather than weakening filtering for the entire network. Verify the feature and menu names against the version you have installed.
Maintenance, Reliability, and Security
DNS is a basic network dependency, so maintenance matters. A Pi-hole outage may make browsing appear broken even when the internet connection is healthy, especially if clients have no alternate resolver.
- Keep software updated: Apply operating-system and Pi-hole updates deliberately, and review release notes when changing major versions.
- Back up configuration: Use Pi-hole’s supported Teleporter export in the web interface before significant changes or migrations. Store the backup somewhere other than the Pi’s storage.
- Watch storage and power: Use a reliable power supply and storage device. Unexpected power loss or worn-out microSD cards can interrupt service.
- Check the dashboard: Review client activity, query volume, and errors after changes. A sudden lack of queries may mean clients are bypassing Pi-hole.
- Protect administration: Use strong credentials, keep the Pi’s software current, and do not expose the admin interface or DNS service directly to the public internet.
For better resilience, keep a tested recovery plan: know how to restore a configuration backup, and know how to change router DNS back if the Pi fails. A second Pi-hole can provide redundancy, but it requires its own maintenance and configuration. Simply advertising two unrelated DNS servers does not guarantee that clients will treat one as a true backup or apply identical filtering to both.
Common Pitfalls to Check First
- Changing the Pi’s IP: A DHCP reservation or address change can leave clients pointing at the wrong server. Update the router configuration and confirm the Pi’s current address.
- Router DNS conflicts: Some routers force their own DNS, proxy client queries, or prevent custom DHCP DNS settings. Verify the resolver address on a client rather than assuming the router change worked.
- Encrypted or hard-coded DNS: Browser Secure DNS, VPNs, and some apps can send DNS elsewhere. Check those settings if a device does not appear in Pi-hole’s query log.
- Expecting complete ad removal: DNS filtering cannot block every ad, particularly content delivered from a site’s own domain.
- Blocking too aggressively: If a service breaks, use the query log to diagnose it before adding broad allowlist entries or disabling filtering.
Conclusion
A Raspberry Pi Pi-hole server is a practical way to add DNS filtering across a home network, including devices that cannot run browser ad blockers. Reserve a stable IP, install Pi-hole from its official instructions, configure DHCP to direct clients to it, and verify the results from the clients themselves.
Keep blocklists focused, make backups, and plan for the Pi to be temporarily unavailable. With those basics in place, Pi-hole can provide useful local network ad blocking while remaining understandable and maintainable for developers and IT users.