FROMDEV

How to Set Up Steam Link on Raspberry Pi: The Complete Guide

Raspberry Pi set up for Steam Link game streaming

Set Up Steam Link on a Raspberry Pi for Smooth, Low-Latency Gaming

A Raspberry Pi can turn a TV or monitor into a convenient Steam gaming screen, streaming games from a more powerful PC elsewhere in your home. The Pi does not run demanding PC games itself: your gaming computer renders each game, while the Raspberry Pi receives and decodes the video stream and sends controller input back.

This guide covers the current setup workflow, network and picture-quality tuning, practical troubleshooting, and how processor performance affects the experience. For most players, a wired network and a correctly configured host PC matter more than raw CPU benchmark numbers.

What You Need Before You Begin

For model-specific advice on resolution, connections, and latency, see Best Raspberry Pi for Steam Link in 2025: 4K Streaming & Low Latency.

Install Steam Link on Raspberry Pi OS

1. Update your system

Open a terminal and install available updates first. The -y option accepts package prompts automatically; omit it if you prefer to review them.

sudo apt update
sudo apt full-upgrade -y
sudo reboot

2. Install and launch the app

On Raspberry Pi OS installations where the package is available through configured repositories, install Steam Link with:

sudo apt install steamlink

Start it from the desktop’s application menu or run:

steamlink

Package availability can depend on the Raspberry Pi OS release and repository configuration. If APT reports that it cannot locate the package, check that the system is fully updated and consult the Steam Link installation options for your specific OS release rather than adding an unverified repository.

Pair the Raspberry Pi with Your Gaming PC

Enable Remote Play on the host PC

  1. Open Steam on the computer that will run your games.
  2. Go to Steam > Settings > Remote Play.
  3. Turn on Enable Remote Play.

Connect and enter the PIN

  1. Launch Steam Link on the Raspberry Pi and choose Get Started or the option to connect to a computer.
  2. Select your gaming PC when it appears. If it is not listed, confirm both devices are on the same local network and that Steam is running on the PC.
  3. Choose the manual computer option if offered, then enter the host name or local IP address.
  4. Enter the PIN shown on the Pi into the Steam prompt on the host PC to pair the devices.
  5. Run the connection test, review the recommended settings, and select a game from your library.

Keep Steam open on the host. If pairing fails, restart Steam and Steam Link, check that the network does not isolate wireless clients, and temporarily review firewall settings on the gaming PC.

Improve Streaming Quality and Reduce Lag

Start with the network

Game streaming is sensitive to inconsistent latency and packet loss. A wired Ethernet connection from both devices to the router is the simplest way to improve reliability. If Wi-Fi is necessary, use a strong 5 GHz connection where available, avoid weak-signal rooms, and reduce competing downloads or video streams.

Choose sensible resolution and frame-rate settings

Set the stream to match the display and the strength of your network—not just the maximum resolution listed for a Pi model. The host PC must render the game, encode the stream, and send it over the network; the Pi must decode it smoothly. A stable 1080p stream is often a better experience than a higher-resolution stream that drops frames.

  1. Open Steam Link settings and find the streaming or bandwidth-quality options.
  2. Begin with the recommended or balanced preset.
  3. Test a familiar game, then increase resolution or quality gradually if performance remains smooth.
  4. If latency or stuttering appears, lower the resolution or frame rate and retest.

Remember that a display’s advertised refresh rate does not guarantee the same frame rate from a streamed game. The host GPU, encoder, network, decoder, and display settings all affect the result.

Connect and test a controller

Pair a Bluetooth controller in Raspberry Pi OS settings or connect it by USB before starting Steam Link. Many common Xbox, PlayStation, and generic controllers work, but compatibility can vary by model, OS version, and connection method. If a controller is unreliable through a hub, connect it directly to the Pi or try a wired connection.

Processor Performance: What Matters for Steam Link?

Single-board computer benchmarks are useful for comparing general CPU or graphics workloads, but they do not directly predict game-streaming quality. In this setup, the Pi is primarily a video-decoding endpoint. Hardware video-decoding support, software compatibility, cooling, and stable network performance can matter more than a headline CPU score.

To compare boards fairly, test the same game, host PC, resolution, codec, network, and Steam Link settings. Record dropped frames, latency, and temperature alongside benchmark results. Sustained workloads can also expose thermal throttling, so adequate airflow matters; see How To Cool Down Raspberry PI for cooling ideas.

Optional: Launch Steam Link at Startup

Autostart configuration varies by Raspberry Pi OS version and desktop environment. On a system using the Labwc desktop, you can add Steam Link to the user’s desktop autostart file rather than editing a path that may not exist on every installation.

  1. Open a terminal and create the autostart directory if needed: mkdir -p ~/.config/labwc.
  2. Edit the file: nano ~/.config/labwc/autostart.
  3. Add a new line containing steamlink, then save and restart the Pi to test it.

If your desktop environment uses a different autostart mechanism, use its session settings instead. Remove the entry if you want the regular desktop to load normally.

Troubleshooting Common Problems

Lag, stuttering, or a poor picture

Steam Link cannot find the PC

Confirm that Steam is open and Remote Play is enabled on the host. Make sure both devices are on the same local network, and check router settings for guest-network separation or wireless client isolation. If discovery still fails, use the manual connection option with the PC’s local IP address.

The controller is not responding

  1. Connect or pair the controller before launching Steam Link.
  2. Test it in Raspberry Pi OS and check its battery or cable.
  3. Try another USB port or connect directly instead of through a hub.
  4. Review controller configuration in Steam if the device connects but the game does not respond correctly.

Conclusion

Setting up Steam Link on a Raspberry Pi is a straightforward way to play games from your PC on another screen without moving the computer. Update Raspberry Pi OS, install and launch Steam Link, enable Remote Play on the host, and pair the devices with the on-screen PIN. Then tune the stream to your display and network.

Choose a Pi based on compatibility and the experience you need, not processor benchmarks alone. For a dependable result, prioritize Ethernet, a capable gaming PC, sensible streaming settings, and good cooling. Once those pieces are in place, your Raspberry Pi can be a compact, convenient Steam streaming endpoint around the home.

Exit mobile version